Подавители пульсации

  • Сокращение пульсации для однородной подачи материала и равномерного распыла
  • Сокращает техобслуживание и требуемое давление подпитки
  • Легкая промывка для упрощения и ускорения смены цветов
  • Удовлетворяет широким требованиям разных систем благодаря многим вариантам подключения подачи жидкости
  • Ограничение скачков давления в системе подачи жидкости
Каталог Каталог

Вам необходимо смягчать перепады давления внутри системы? Подавители пульсаций Graco разработаны для решения ваших технологических потребностей.

Surge Tank Model 238986

Maximum Fluid Working Pressure
2.1 MPa, 21 bar
Maximum Gas Charge Pressure
2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
76 lpm
Maximum Operating Temperature
50° C
Wetted Parts
304 & 316 Stainless Steel, PTFE

Surge Tank Model 238987

Maximum Fluid Working Pressure
2.1 MPa, 21 bar
Maximum Gas Charge Pressure
2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
76 lpm
Maximum Operating Temperature
50° C
Wetted Parts
304 & 316 stainless steel, PTFE

Surge Tank Model 238988

Maximum Fluid Working Pressure
2.1 MPa, 21 bar
Maximum Gas Charge Pressure
2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
76 lpm
Maximum Operating Temperature
50° C
Wetted Parts
304 & 316 stainless steel, PTFE

Surge Tank Model 238987

Maximum Fluid Working Pressure
2.1 MPa, 21 bar
Maximum Gas Charge Pressure
2.1 MPa, 21 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
76 lpm
Maximum Operating Temperature
50° C
Wetted Parts
304 & 316 stainless steel, PTFE

 

Surge Tank Model 233736

Maximum Fluid Working Pressure
2.5 MPa, 25 bar
Maximum Air Inlet Pressure
1.5 MPa, 15 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
Fluid does not flow through tank
Maximum Operating Temperature
80° C
Wetted Parts
Stainless steel, PTFE

Surge Tank Model 218509

Maximum Fluid Working Pressure
4.2 MPa, 42 bar
Maximum Gas Charge Pressure
4.2 MPa, 42 bar
Maximum Flow Rate (Maximum flow rates are recommended maximums for peak performance, Exceeding these values reduces the surge tank’s ability to dampen pulsation)
76 lpm
Maximum Operating Temperature
50° C
Wetted Parts
Carbon steel, electroless nickel-plated steel, UHMW polyethylene, fluoroelastomer, PTFE

Инструкция